01Introduction
Buy for the claims you make. If you promise washability, you need a way to test it.
Cheaper instruments are fine for batch control if you calibrate them and use them the same way each time.
02Why It Matters
- Each test links to a defect or a claim
- Instruments should be calibrated and logged
- Start essential, add as products need
03Tests & Reference Methods
| Test | Purpose | Reference |
|---|---|---|
| Viscosity | Consistency for application and filling | Ford cup, Krebs unit (KU) or rotational viscometer |
| Fineness of grind | Particle size and dispersion | Hegman gauge |
| Non-volatile matter | Solids content | Oven method |
| pH | Stability of water-based paint | pH meter |
| Gloss | Finish level | Gloss meter at 60 degrees |
| Drying time | Touch and hard dry | Recorder or manual |
| Adhesion | Bond to substrate | Cross-cut method |
| Scrub resistance | Washability | Scrub tester |
| Hiding power | Coverage | Contrast chart |
| Density | Weight per litre | Density cup |
04How IPCS Supports Your Laboratory
- Instrument shortlist for your products
- Supplier comparison and calibration advice
- Test method sheets
Methods and limits depend on your product and applicable standard. We confirm them with you before the laboratory is commissioned.
05Frequently Asked Questions
Which instruments are essential?
Balance, viscosity tool, grind gauge, oven, pH meter and applicators.
Do I need a gloss meter?
For gloss claims and enamels, yes.
Is a scrub tester necessary?
If you claim washability.
How often to calibrate?
As per instrument guidance, usually yearly or more.
Can I buy used?
If calibrated and working.
