Paint plant, machinery & formulation consultancy, India and worldwide

Paint Scrub Resistance (Washability) Testing

How scrub tests work, how to prepare panels, and how to use results without overclaiming.

01Introduction

In short: a scrub test passes a brush or pad over a dried paint film with abrasive medium until the film wears through. Results are reported as cycles to failure or film loss. It supports washability claims for interior paints, but only if panels, film thickness and drying conditions are controlled.

Washable is a common claim in decorative paint. A number from your own lab supports it.

Scrub results vary with film build and cure time, so conditions must be fixed.

02Why It Matters

  • Backs up washability claims
  • Compares formulations
  • Detects binder or filler problems

03How the Test or Routine Works

  1. Prepare panelsSame substrate and film thickness.
  2. CureFixed days and conditions.
  3. MountOn the tester.
  4. Apply abrasive mediumAs specified.
  5. Run cyclesUntil failure or fixed number.
  6. ReportCycles and conditions.

04How IPCS Supports Your Laboratory

  • Test set-up and procedure
  • Interpretation and claim wording
  • Formulation improvement advice

Methods and limits depend on your product and applicable standard. We confirm them with you before the laboratory is commissioned.

05Frequently Asked Questions

Do I need a scrub tester?

If you claim washability, yes or use an outside lab.

How long should panels cure?

Per the standard, commonly several days at set conditions.

What counts as failure?

Per standard, usually when the film is worn through to the substrate.

How do I improve scrub resistance?

More binder, better binder, less coarse filler.

Can I quote cycles in marketing?

Only with test conditions stated.

Ask About Laboratory Setup

Tell us what you want to make. A paint technologist replies with next steps within one working day.

Your details are used only to reply to this enquiry. Direct line: +91 82104 79182.

Planning a paint or dry mix plant?Get Technical Consultation