01Introduction
Filling is where product turns into sales. Overfilling loses money; underfilling causes complaints.
The right machine matches your pack sizes and the viscosity range of your products.
02What Is Paint Filling Machine?
Volumetric fillers, such as piston fillers, dispense a set volume. Weigh fillers use load cells and a valve to deliver a set weight, which suits density variation. Gravity fillers suit thin products. Thick paints and textures need positive-displacement or pumps with large orifices.
Packs range from 500 ml cans to 20 litre pails and 200 litre drums.
03Working Principle
The product is pumped or gravity-fed through a nozzle into the container while volume or weight is controlled. Filling speed and accuracy depend on viscosity and nozzle design.
- Piston filling for repeatable volumes
- Weigh filling for accuracy by weight
- Gravity for thin liquids
- Pump filling for thick products
04Applications
- Emulsion paint and primer pails
- Enamel and varnish cans (flameproof)
- Texture and waterproofing pails
- Colorant bottles (small fillers)
05Types & Configurations
| Type | Features | Suits |
|---|---|---|
| Manual weigh filling | Scale and valve | Start-ups |
| Semi-automatic piston filler | Operator places containers | Mid-size plants |
| Semi-automatic weigh filler | Load cell control | Accurate by weight |
| Automatic in-line filler | Conveyor and nozzles | High output |
| Flameproof filler | Explosion-proof | Solvent paints |
06Key Selection Factors
| Factor | What to decide | Guidance |
|---|---|---|
| Pack size range | From small tins to pails | Single or multiple heads |
| Viscosity | Thin to thick | Nozzle and pump type |
| Accuracy | Volume or weight tolerance | Weigh filling is most accurate |
| Speed | Containers per hour | Match to production |
| Cleaning | Quick dismantling | Sanitary design |
| Solvent use | Flameproof requirements | Explosion-proof |
07Where It Fits in the Process
- Place container
- FillBy volume or weight.
- CheckWeigh sample.
- Cap or lid
- LabelWith batch code.
- StackOn pallets.
08Installation & Utility Requirements
- Level floor
- Compressed air for pneumatic types
- Power and earthing
- Space around for pallets and containers
09Safety & Operating Practice
- Guard nozzles and moving parts
- Spill containment
- Flameproof for solvents
- Lifting aids for pails
10Maintenance & Common Problems
| Problem | Likely cause | Fix |
|---|---|---|
| Under- or overfill | Viscosity change, air entrainment | Calibrate and degas |
| Dripping | Nozzle design | Anti-drip nozzle |
| Foam during fill | High speed fill | Bottom-up filling |
| Slow cleaning | Complex parts | Choose quick-release design |
| Leaks | Seal wear | Replace seals |
11How IPCS Supports Machinery Selection
- Selection by pack size and viscosity
- Automation level recommendation
- Layout with capping and labelling
Machine details are indicative and are finalised against your product, batch size and site during quotation.
12Frequently Asked Questions
Piston or weigh filler?
Piston fillers are economical for repeatable volumes; weigh fillers handle density variation and give weight accuracy.
How do I fill thick textured paint?
With positive-displacement pumps and wide nozzles.
Do I need a flameproof filler?
For solvent paints, yes.
Can one machine fill all sizes?
Often with different nozzles or settings.
What is a typical fill speed?
Depends on size and machine; stated in the quotation.
