01Introduction
Self-levelling compounds prepare floors for tiles, vinyl, wood and carpet. They are a high-value dry mix product, but also one of the least forgiving to produce.
A plant needs a proper laboratory before selling it.
02What Is Self-Leveling Floor Compound?
The product spreads under its own weight, so it needs high flow with low water, no segregation and a surface free from pinholes. EN 13813 gives a way to describe screed materials by class and strength, for example compressive and flexural strength designations.
Many formulas use a combination of Portland cement, calcium aluminate cement and calcium sulfate for early strength and controlled expansion.
03Applications & End Uses
- Floor levelling before tiling or vinyl
- Industrial floor preparation
- Renovation of uneven slabs
- Thin leveling layers 2 to 10 mm (thicker with special grades)
04Types, Grades & Variants
| Type | Features | Use |
|---|---|---|
| Thin self-leveling (2 to 10 mm) | High flow, fine surface | Under floor coverings |
| Thick self-leveling (up to 30 mm or more) | Coarser filler | Uneven slabs |
| Fibre-reinforced SLU | Crack control | Wood floors |
| Calcium sulfate-based | Special systems | Indoor only |
05Raw Materials & Their Functions
| Raw material | Function | Selection note |
|---|---|---|
| Portland and calcium aluminate cement | Binder | Setting and strength profile |
| Fine filler and sand | Body | Narrow grading, very low moisture |
| Powder superplasticiser | Flow | Type and dose critical |
| Retarder and accelerator | Set control | Small doses |
| Cellulose ether (very low) | Anti-segregation | Careful dose |
| Defoamer | Surface quality | Tuned to mix |
| Polymer powder (optional) | Adhesion | For flexible grades |
06Formulation Guidance
SLU formulas are complex. Ranges are only for orientation.
| Component group | Indicative range | Why it matters |
|---|---|---|
| Cement system | 25% to 45% | Binder |
| Fine sand and filler | 45% to 70% | Body |
| Superplasticiser and additives | 0.5% to 3% | Flow, set |
| Polymer powder | 0% to 4% | Adhesion |
07Manufacturing Process
- Dry and screen fine materialsStrict moisture limits.
- Pre-blend additivesSeveral small additives.
- WeighVery accurate.
- MixPaddle mixer to uniformity.
- Flow testFlow ring and surface check.
- PackSealed bags.
08Machinery & Equipment
| Machine | Role in this product |
|---|---|
| Ribbon Blender | Mixer |
| Powder Mixing & Dry Mortar Mixer | Powder mixer |
| Dry Mix Plant Machinery | Full line with automatic batching |
09Plant Layout, Space & Utilities
- Accurate automatic or high-precision batching
- Dry and clean line to avoid contamination
- Laboratory with flow ring, moulds and strength testing
10Quality Control & Testing
| Test or check | What it tells you | Method or reference |
|---|---|---|
| Flow | Self-leveling ability | Flow ring at set times |
| Surface quality | Finish | Visual and pinholes |
| Set time | Walkable time | Vicat |
| Compressive and flexural strength | Class | Prisms |
| Shrinkage and cracking | Durability | Panel test |
11Common Production Problems & Fixes
| Problem | Likely cause | What to do |
|---|---|---|
| Segregation | Too much water, wrong grading | Adjust |
| Pinholes | Air entrapment | Defoamer, mixing |
| Cracks | Shrinkage | Adjust expansion and fibre |
| Fast flow loss | Hot weather | Retarder |
| Weak surface | Over-wet mix | Instructions |
12Capacity, Cost & Investment Factors
Raw materials and batching drive cost:
- Calcium aluminate cement price
- Powder superplasticiser cost
- Batching accuracy equipment
- Technical support to contractors
13How IPCS Supports This Project
- Formulation and test protocol
- Batching system design
- Contractor guidance
Scope, deliverables and timelines are written into a quotation after we understand your products, capacity, site and budget. Machine details are indicative and are finalised against your product.
14Frequently Asked Questions
Is self-leveling compound hard to make?
The mixing is simple, but formulation and batching are demanding.
What is the flow ring test?
A cylinder poured on a plate to measure spread diameter.
Do I need calcium aluminate cement?
Many formulas use it, but not all.
Can I make it with a tile adhesive plant?
Yes with stricter batching and cleaning.
How thick can it be?
Depends on grade.
How can IPCS help me start self-leveling floor compound manufacturing?
IPCS confirms the product range and capacity, plans the process and machines, tunes the formulation with your raw materials, sets up the laboratory, trains your team and supports the first batches. The written quote states exactly what is included.
