Paint plant, machinery & formulation consultancy, India and worldwide

Flexible Tile Adhesive Manufacturing (S1 / S2): Formula & Testing

How deformable S1 and S2 tile adhesives are formulated, why polymer type and dose matter, and how to prove deformability.

01Introduction

In short: flexible tile adhesive is a cement-based adhesive with enough polymer to deform under tile movement, classified as S1 (deformable) or S2 (highly deformable) under EN 12004 and EN 12002. It uses more redispersible polymer, selected cement and carefully graded sand. Plants must prove deformability by test, not assume it from polymer dose.

Large tiles, outdoor floors, underfloor heating and temperature-sensitive substrates move more than ordinary tiled surfaces. Flexible adhesive prevents tiles popping off.

It is a premium tile adhesive grade and an attractive upgrade for plants already making C2 products.

02What Is Flexible Tile Adhesive?

EN 12004 classifies cement adhesives as C1 or C2, with optional characteristics such as T (reduced slip), E (extended open time), F (fast setting) and S1 or S2 (deformable). Deformability is measured by transverse deformation under EN 12002.

Higher polymer content and flexible polymer types increase deformation, but cost and workability also change, so the formula needs balance.

03Applications & End Uses

  • Large and heavy tiles
  • Exterior balconies and facades
  • Underfloor heating
  • Metal, timber and other deformable substrates
  • Swimming pools and wet areas (with waterproof systems)

04Types, Grades & Variants

ClassMeaningTypical use
C2 S1Improved adhesive, deformableLarge tiles, exterior
C2 S2Improved adhesive, highly deformableDemanding substrates, heating
C2TE S1 / S2Reduced slip, extended open timeLarge format and wall tiling
C2F S1Fast setting deformableQuick turnaround jobs

05Raw Materials & Their Functions

Raw materialFunctionSelection note
Portland cement (42.5 or 52.5 grade)BinderQuality and consistency
Fine graded sandBodyNarrow grading
Redispersible polymer powder (VAE, acrylic)Flexibility and adhesionHigher dose; type decides deformation
HPMC / cellulose etherWater retention, open timeViscosity grade
Starch etherWorkability and slipSmall dose
Calcium formate or accelerator (F types)Fast settingOptional
Fibres or lightweight fillersOpen time, coverageOptional

06Formulation Guidance

Flexible adhesives contain more polymer than basic C1 grades. Final dose is set by deformation tests.

Component groupIndicative rangeWhy it matters
Cement28% to 40%Binder
Sand50% to 65%Body
Polymer powder3% to 8%Flexibility, adhesion
Cellulose ether and additives0.4% to 1.2%Workability
Ranges are indicative starting points for trials, not a ready formula. Final proportions depend on your raw materials, equipment, target cost and the standard you need to meet.

07Manufacturing Process

  1. Dry and screen sandMoisture and grading.
  2. Premix additivesCellulose ether, starch ether and accelerators with a portion of filler.
  3. Weigh batch
  4. Main mixRibbon or paddle mixer.
  5. TestAdhesion, open time, deformation.
  6. PackMoisture-proof bags.

08Machinery & Equipment

MachineRole in this product
Tile Adhesive Mixing MachineMixing machine for adhesives
Ribbon BlenderRibbon blender
Dry Mix Plant MachineryComplete line with silos

09Plant Layout, Space & Utilities

  • Accurate batching of polymer and additives
  • Tight dust control
  • Laboratory with a tensile adhesion tester

10Quality Control & Testing

Test or checkWhat it tells youMethod or reference
Tensile adhesion strengthClass compliancePull-off test per standard
Transverse deformationS1 or S2 classDeformation test
Open timeApplication windowPull-off at fixed times
SlipWall tilingSlip test
WorkabilityApplicationTrowel and slump

11Common Production Problems & Fixes

ProblemLikely causeWhat to do
Low deformationPolymer type or doseAdjust polymer
Sticky or heavyToo much cellulose etherReduce and rebalance
Poor adhesionMoisture, weak cementCheck raw material and mixing
SlumpingLow thickenerAdjust additives
Short open timeWeak water retentionIncrease cellulose ether

12Capacity, Cost & Investment Factors

Polymer drives cost:

  • Polymer powder cost and dose
  • Testing for deformability
  • Technical support for tile fixers
  • Positioning against competition

13How IPCS Supports This Project

  • S1 and S2 formulation development
  • Test plan under EN 12004 and EN 12002
  • Process and batching setup

Scope, deliverables and timelines are written into a quotation after we understand your products, capacity, site and budget. Machine details are indicative and are finalised against your product.

14Frequently Asked Questions

What does S1 mean on tile adhesive?

Deformable adhesive with transverse deformation within the S1 range under the standard.

Is more polymer always better?

Not necessarily; it raises cost and can affect workability. Test.

Do I need a special mixer?

No; a good ribbon or paddle mixer is enough.

Can flexible adhesive be used for exterior tiles?

Yes, with proper waterproofing and movement joints.

How do I test deformability?

With the transverse deformation method in a recognised laboratory.

How can IPCS help me start flexible tile adhesive manufacturing?

IPCS confirms the product range and capacity, plans the process and machines, tunes the formulation with your raw materials, sets up the laboratory, trains your team and supports the first batches. The written quote states exactly what is included.

Get Technical Consultation

Tell us what you want to make. A paint technologist replies with next steps within one working day.

Your details are used only to reply to this enquiry. Direct line: +91 82104 79182.

Planning a paint or dry mix plant?Get Technical Consultation