01Quick Answer
Class naming follows the standard used in your market. Confirm the current edition and local acceptance before labelling.
02C1 vs C2 at a Glance
| Aspect | C1 | C2 |
|---|---|---|
| Class meaning | Normal cementitious adhesive | Improved cementitious adhesive |
| Adhesion requirement | Lower minimum | Higher minimum |
| Polymer | Lower or none | Higher polymer content typical |
| Typical use | Ceramic tiles on sound substrates | Vitrified, large tiles, difficult substrates |
| Cost | Lower | Higher |
| Testing burden | Moderate | Higher |
03Formulation Impact
C2 needs better cement, graded sand, redispersible polymer powder and cellulose ether, with well-controlled mixing. See flexible tile adhesive.
04Testing
Class claims depend on tensile adhesion, open time, slip and other tests. See dry mix testing.
05Which to Make
- Start with C1 for basic markets
- Add C2 when you have testing and polymer supply
- Do not label a class without test data
06Next Step
IPCS can help you design and test C1 and C2 products.
07Frequently Asked Questions
Is C2 always better?
It performs higher but costs more; use as needed.
Can I make C2 on a simple plant?
Yes if mixing and testing are controlled.
Do I need an outside lab?
For type testing, often.
What tiles need C2?
Large, dense or difficult substrates.
