01Introduction
Dry mix looks the same in the bag whether it is good or bad. Only tests show the difference.
Class claims such as C1 and C2 rest on test data, so the lab protects your brand.
02Why It Matters
- Confirms the product meets the class you claim
- Catches mixer and sand problems early
- Supports technical data sheets
03Tests & Reference Methods
| Test | Purpose | Reference |
|---|---|---|
| Sieve analysis | Particle grading | Sieve set |
| Moisture | Raw sand and product | Oven |
| Water demand | Mixing ratio | Trial mix |
| Workability and pot life | Usable time | Trowel test and time |
| Open time | Time tile can be placed | Per standard |
| Slip | Sag of tile | Per standard |
| Adhesion strength | Bond | Tensile tester |
| Compressive and flexural | Mortar strength | Moulds and press |
| Bag weight | Pack accuracy | Scale |
04Common Mistakes
- Using damp sand in trial batches
- Not controlling curing conditions
- Comparing results from different test methods
- Claiming a class without test data
05How IPCS Supports Your Laboratory
- Test list matched to your products
- Sample preparation and curing set-up
- Test method sheets and record formats
Methods and limits depend on your product and applicable standard. We confirm them with you before the laboratory is commissioned.
06Frequently Asked Questions
What tests does tile adhesive need?
Open time, slip, tensile adhesion and often water demand and pot life, per the standard you follow.
Do I need a tensile tester?
To claim a class, yes or use an external lab.
How do I check mixing?
Sample from several points and compare.
Can I use an outside lab?
Yes for periodic type testing.
How often to test?
Routine each batch for simple tests; periodic for performance tests.
