Paint plant, machinery & formulation consultancy, India and worldwide

Synthetic Enamel Manufacturing Process: Grind, Let-Down & Safety

How solvent-based synthetic enamel is made, with milling, let-down, driers and the safety steps that matter.

01Quick Answer

In short: synthetic enamel is made by grinding pigment in alkyd resin and solvent to a fine paste, then letting down with more resin, solvent and driers, adjusting colour and viscosity, filtering and filling. Flameproof equipment, earthing and ventilation are mandatory design needs.

Enamel needs finer grinding than matt emulsion because gloss reveals poor dispersion.

02Process Steps

  1. PremixResin, solvent, wetting agent, pigment.
  2. MillBead mill to target fineness.
  3. Let downAdd resin and solvent.
  4. Add driers and anti-skinAs formula.
  5. Adjust colour and viscosity
  6. TestGloss, drying, fineness.
  7. Filter and fill

03Safety

  • Flameproof motors and wiring
  • Earthing and bonding
  • Ventilation
  • Fire protection
  • No ignition sources

04Machines

See bead mill and synthetic enamel paint.

05Quality Points

  • Hegman fineness
  • Gloss at 60 degrees
  • Drying time
  • Viscosity

06Next Step

IPCS can help plan a safe enamel line.

Discuss My Project

07Frequently Asked Questions

Do I need to make resin?

No; most plants buy alkyd resin.

Why is grind important?

For gloss and colour strength.

What solvents?

As per formula; ventilate.

Can I use the same machines as emulsion?

Not safely unless designed for solvents.

What is the biggest risk?

Fire.

Get Technical Consultation

Tell us what you want to make. A paint technologist replies with next steps within one working day.

Your details are used only to reply to this enquiry. Direct line: +91 82104 79182.

Planning a paint or dry mix plant?Get Technical Consultation