01Introduction
Epoxy flooring is a growing category for factories, warehouses, hospitals and showrooms. Customers value hardness, chemical resistance and cleanability.
It is a technical product: the finished floor depends as much on application and substrate preparation as on the coating.
02What Is Epoxy Floor Coating?
The epoxy base contains resin, pigments and fillers; the hardener cross-links the resin. Systems include thin coatings, self-leveling floors with 1 to 3 mm thickness and quartz-filled broadcast systems. Solvent-free and water-based epoxies reduce odour.
Epoxy yellows and chalks in sunlight, so exterior floors usually get a polyurethane topcoat.
03Applications & End Uses
- Factory and warehouse floors
- Hospital and laboratory floors
- Parking decks (with suitable topcoat)
- Showrooms and commercial kitchens
- Chemical storage areas
04Types, Grades & Variants
| System | Features | Typical thickness |
|---|---|---|
| Thin film coating | Economical, sealing | Low build |
| Self-leveling epoxy | Smooth, high gloss | Medium build |
| Broadcast quartz system | Slip-resistant, heavy duty | High build |
| Water-based epoxy | Low odour, breathable | Light duty |
| Epoxy mortar | Repairs and heavy loads | Very high build |
05Raw Materials & Their Functions
| Raw material | Function | Selection note |
|---|---|---|
| Liquid epoxy resin (DGEBA type) | Binder base | Epoxy equivalent weight |
| Amine or polyamide hardener | Cross-linker | Pot life and cure speed |
| Reactive diluents | Reduce viscosity | Impact on hardness |
| Fillers (quartz, barytes, talc) | Body and abrasion resistance | Dry and graded |
| Pigments | Colour | Epoxy-compatible |
| Flow and defoaming additives | Smooth finish | Test in system |
06Formulation Guidance
Epoxy floor formulations are supplied as base and hardener by resin suppliers' guides. Fillers and pigments are added by the manufacturer.
| Component group | Indicative range | Why it matters |
|---|---|---|
| Base: epoxy resin | 40% to 65% | Binder |
| Base: fillers and pigments | 30% to 55% | Colour and body |
| Base: additives and diluent | 2% to 10% | Flow, viscosity |
| Hardener | As per ratio | Cure |
07Manufacturing Process
- Pre-dry fillersMoisture control.
- Charge resinAdd additives and diluent.
- Add pigments and fillersUnder high shear.
- DegasAllow air to escape.
- Test baseViscosity and colour.
- Pack baseIn kit containers.
- Pack hardenerMatched amount.
08Machinery & Equipment
| Machine | Role in this product |
|---|---|
| Twin Shaft Disperser | High-torque dispersion of thick base |
| High Speed Disperser | Premix of liquid phase |
| Sigma Mixer | Heavy pastes and mortars |
| Paint Filling Machine | Kit filling and labelling |
09Plant Layout, Space & Utilities
- Segregated area for epoxy and hardener
- Ventilation and PPE
- Dry storage and temperature control
- Test panel area with standard curing
10Quality Control & Testing
| Test or check | What it tells you | Method or reference |
|---|---|---|
| Viscosity of base | Self-leveling behaviour | Brookfield |
| Mix ratio and pot life | Cure window | Timed sample |
| Hardness (Shore D) | Cure and durability | Durometer |
| Abrasion resistance | Wear life | Abrasion test |
| Adhesion on concrete | Bond | Pull-off |
| Chemical resistance | Application fit | Spot or immersion tests |
11Common Production Problems & Fixes
| Problem | Likely cause | What to do |
|---|---|---|
| Amine blush | Cold, damp cure | Control temperature and humidity; wash blush |
| Pinholes and bubbles | Air or moisture in substrate | Degas, seal substrate |
| Soft film | Wrong ratio | Mix by weight accurately |
| Colour variation | Pigment dispersion | Improve grind |
| Delamination | Dusty or wet slab | Mechanical preparation, moisture test |
12Capacity, Cost & Investment Factors
Raw materials and technical service dominate:
- Epoxy resin and hardener cost
- Filler and pigment handling
- Two-pack packaging
- Applicator training
- Warranty and site support
13How IPCS Supports This Project
- System selection by floor use
- Base formulation trials
- Kit packaging process
- Applicator guidance
Scope, deliverables and timelines are written into a quotation after we understand your products, capacity, site and budget. Machine details are indicative and are finalised against your product.
14Frequently Asked Questions
Can epoxy floors be used outdoors?
They chalk and yellow in sunlight, so a UV-stable PU topcoat is usually applied.
What affects pot life?
Hardener type, temperature and batch size.
Do floors need a primer?
Usually yes.
Why is moisture a problem?
Moisture in concrete can blister or delaminate the coating.
How is a floor system specified?
By thickness, type, finish and test requirements.
How can IPCS help me start epoxy floor coating manufacturing?
IPCS confirms the product range and capacity, plans the process and machines, tunes the formulation with your raw materials, sets up the laboratory, trains your team and supports the first batches. The written quote states exactly what is included.
