Paint plant, machinery & formulation consultancy, India and worldwide

Paint Filtration Machine: Vibro Sieve, Bag & Cartridge Filters

How to remove grit, skin and lumps before filling, which filter types suit which paints, and how to avoid blocking.

01Introduction

In short: paint filtration removes grit, skin, coagulum and lumps before filling. Common options are vibrating sieves, bag filters and cartridge filters, with mesh chosen to match the paint. Correct mesh size and filter area protect product quality without slowing production.

Customers notice specks and lumps immediately. A filter is cheap insurance and an essential step before filling.

Too fine a mesh blocks quickly; too coarse lets defects through.

02What Is Paint Filtration Machine?

Vibro sieves use a vibrating screen and are good for thick paints and high flow. Bag and cartridge filters are enclosed, suitable for solvent paints and fine filtration. Self-cleaning filters reduce downtime in larger plants.

Mesh size is selected against the finest particle you must remove and the paint viscosity.

03Working Principle

Paint passes through a mesh or filter medium that retains particles above the cut size. Vibration or backflow helps keep the filter open.

  • Vibro sieve for high flow and thick products
  • Bag filter for enclosed filtration
  • Cartridge filter for fine filtration
  • Self-cleaning for continuous production

04Applications

  • Final filtration of emulsion paint
  • Enamel and varnish clarity
  • Colorant and paste filtration
  • Intermediate filtration before filling

05Types & Configurations

TypeFeaturesSuits
Vibrating sieveOpen, high flowWater-based paints
Bag filterEnclosed, easy replacementSolvent and water-based
Cartridge filterFine filtrationClear coatings
Basket strainerSimple, coarsePump protection

06Key Selection Factors

FactorWhat to decideGuidance
ViscosityThin to thickDetermines type and area
Mesh sizeParticle cutTypically 100 to 200 microns for emulsion; finer for clear coatings
Flow rateLitres per minuteMatch to filling
MaterialSS or otherCorrosion and cleaning
Solvent useEnclosed or flameproofSafety
CleaningQuick changeTime saving

07Where It Fits in the Process

  1. Pump paint to filter
  2. FilterRemove oversize.
  3. CollectIn holding tank or filler.
  4. Clean filterBetween batches.
  5. Check qualitySample after filter.
  6. FillFrom filtered paint.

08Installation & Utility Requirements

  • Position before the filler
  • Pump and pipes sized for flow
  • Drain for cleaning
  • Earthing for solvents

09Safety & Operating Practice

  • Enclosed filters for solvents
  • Guard moving parts
  • Pressure gauges
  • Spill control

10Maintenance & Common Problems

ProblemLikely causeFix
Blocked filterMesh too fineUse coarser mesh or larger area
Specks passMesh too coarseReduce mesh size
Slow flowHigh viscosityLarger filter, adjust pump
LeakageSeal damageReplace seals
FoamPump airSeal pumps and lines

11How IPCS Supports Machinery Selection

  • Filter type and mesh selection
  • Integration with filling
  • Cleaning procedures

Machine details are indicative and are finalised against your product, batch size and site during quotation.

12Frequently Asked Questions

What mesh should I use for emulsion paint?

Often 100 to 200 micron, tuned to the product.

Vibro sieve or bag filter?

Vibro sieves for high flow; bag filters for enclosed use and solvents.

Can filters remove pigment lumps?

They catch lumps above mesh size but do not fix poor dispersion.

How often should I clean?

After each batch or as needed.

Do I need filtration for colorants?

Yes, to remove oversize.

Get Machinery Details

Tell us what you want to make. A paint technologist replies with next steps within one working day.

Your details are used only to reply to this enquiry. Direct line: +91 82104 79182.

Planning a paint or dry mix plant?Get Technical Consultation