01Quick Answer
In short: emulsion paint is made by dispersing pigment and fillers in water with a dispersant, then letting down with emulsion binder, thickener, defoamer and preservative under slow mixing. After adjusting pH, viscosity and colour, the batch is tested, filtered and filled.
The process is simple, but order of addition and shear control decide quality.
02Process Steps
- Charge waterAdd dispersant and wetting agent.
- Add pigment and fillersUnder high speed.
- DisperseTo target fineness.
- Let downReduce speed, add binder.
- Add additivesDefoamer, coalescent, biocide.
- ThickenAdjust viscosity.
- Adjust pH and colour
- Test, filter, fill
03Control Points
- Dispersion fineness
- Foam control
- pH range
- Viscosity target
- Preservative addition
04Machines
A high speed disperser, tanks, filter and filling setup are the core. See interior emulsion and exterior emulsion.
05Common Issues
See common problems.
06Next Step
IPCS can provide a process sheet for your emulsion range.
07Frequently Asked Questions
Why add binder last?
Shear can destabilise some emulsions.
How long is dispersion?
Set by trials.
Do I need a mill?
Usually not for matt emulsion.
How to avoid foam?
Slow addition and a suitable defoamer.
