01Quick Answer
In short: most paint defects trace back to dispersion, formulation balance, raw material variation, storage or application. Use the table to find likely causes, then confirm in the lab. Do not change several things at once.
These are general causes. Your formula and process decide the real answer. For help see troubleshooting service.
02Problems and Likely Causes
| Problem | Likely causes | Check first |
|---|---|---|
| Settling | Low thickener, large particles | Grind and thickener |
| Foaming | Air entrainment, surfactants | Speed, defoamer |
| Viscosity rise | pH, thickener interaction | pH and storage |
| Viscosity fall | Biological attack, thickener loss | Preservation |
| Low opacity | Low TiO2 or poor dispersion | Formula, grind |
| Low gloss | Poor dispersion, wrong binder | Hegman, binder |
| Flooding and floating | Pigment mismatch | Dispersion, additives |
| Cracking | Brittle film, thick coat | Binder, film build |
| Colour variation | Dosing and base variation | Batch records |
| Sagging | Low viscosity | Rheology |
| Blistering | Moisture, poor adhesion | Surface and primer |
03How to Troubleshoot
- Collect dataBatch, formula, process.
- Check raw materialsCompare lots.
- Reproduce in labBench trial.
- Change one variableTest.
- Apply fixUpdate procedure.
04Prevention
- Written procedures
- Incoming material checks
- Batch records
- Retained samples
05Next Step
Send IPCS photos and batch data for a first opinion.
06Frequently Asked Questions
Can I fix a failed batch?
Sometimes; test small portions first.
Why does paint thicken in the tin?
Often pH or thickener issues.
Why does gloss vary?
Dispersion or film thickness.
What causes colour drift?
Dosing or base differences.
Who can help?
Contact IPCS.
