01Introduction
Sealers serve warehouses, driveways, decorative concrete and facades. They are sold in smaller volumes than paint but at higher value per litre.
The challenge is choosing the right chemistry, since a sealer that works on a driveway may fail on a facade.
02What Is Concrete Surface Sealer?
Film-forming acrylic sealers leave a gloss or satin film. Penetrating sealers leave a nearly invisible treatment inside the pores. Densifiers react with calcium compounds to harden and dust-proof floors.
Solvent-based acrylics penetrate better and dry faster but are flammable. Water-based options are common for interiors.
03Applications & End Uses
- Industrial floors (dust-proofing)
- Decorative concrete and pavers
- Facade protection
- Driveways and pavements
- Before painting on very porous concrete
04Types, Grades & Variants
| Type | Mechanism | Use |
|---|---|---|
| Acrylic film-forming sealer | Surface film | Decorative concrete |
| Silane / siloxane repellent | Penetrating water repellency | Facades, pavements |
| Silicate densifier | Chemical hardening | Industrial floors |
| Epoxy or PU sealer | High-build barrier | Chemical areas |
05Raw Materials & Their Functions
| Raw material | Function | Selection note |
|---|---|---|
| Acrylic polymer (solution or emulsion) | Film former | Water- or solvent-based |
| Silane or siloxane | Penetrating repellent | Active content and carrier |
| Sodium, potassium or lithium silicate | Densifier | Concentration and stability |
| Solvents or water | Carrier | Flammability, odour |
| Additives | Flow, UV, anti-blush | Test |
06Formulation Guidance
Formulas depend on the type. Films are mostly polymer solution; repellents are mostly carrier.
| Component group | Indicative range | Why it matters |
|---|---|---|
| Film-forming acrylic: polymer solids | 15% to 30% | Film |
| Silane / siloxane: active | 5% to 20% | Repellency |
| Silicate densifier: active | 10% to 30% | Hardening |
07Manufacturing Process
- Select typeFilm, repellent or densifier.
- Charge carrierSolvent or water.
- Add activeSlowly under stirring.
- Add additives
- TestOn concrete panels.
- Filter and pack
08Machinery & Equipment
| Machine | Role in this product |
|---|---|
| Paint Mixing & Storage Tank | Stirred closed tank |
| Paint Filtration Machine | Fine filtration |
| Paint Filling Machine | Filling |
09Plant Layout, Space & Utilities
- Flameproof layout for solvent-based types
- Concrete test panels
- Clean tanks to avoid cross-contamination
10Quality Control & Testing
| Test or check | What it tells you | Method or reference |
|---|---|---|
| Water absorption of treated concrete | Sealing effect | Absorption test |
| Dust and abrasion resistance | Floor hardening | Abrasion test |
| Appearance and gloss | Finish | Visual and gloss |
| Adhesion of overcoat | Compatibility | Overcoat test |
| Stability | Shelf life | Storage |
11Common Production Problems & Fixes
| Problem | Likely cause | What to do |
|---|---|---|
| Blushing | Moisture and solvent | Adjust solvent, avoid humid application |
| Slippery surface | Gloss film | Add anti-slip |
| Poor penetration | Dense concrete | Check viscosity and carrier |
| White bloom | Silicate residue | Wash off excess |
| Yellowing | Binder | Choose UV-stable |
12Capacity, Cost & Investment Factors
Small volume, high value:
- Active ingredient cost
- Small packs
- Technical sales
13How IPCS Supports This Project
- Sealer range and testing
- Claim wording
Scope, deliverables and timelines are written into a quotation after we understand your products, capacity, site and budget. Machine details are indicative and are finalised against your product.
14Frequently Asked Questions
What is the difference between a sealer and a coating?
A sealer is usually thin and penetrates or forms a thin film, while a coating builds a thicker layer.
Can concrete sealer stop water leaks?
It reduces absorption but does not stop leaks from cracks.
Is a densifier a sealer?
It hardens the surface; combined with sealer for stain resistance.
Can sealed concrete be painted?
Depends on sealer; test compatibility.
How often must it be reapplied?
Depends on traffic and exposure.
How can IPCS help me start concrete surface sealer manufacturing?
IPCS confirms the product range and capacity, plans the process and machines, tunes the formulation with your raw materials, sets up the laboratory, trains your team and supports the first batches. The written quote states exactly what is included.
