Paint plant, machinery & formulation consultancy, India and worldwide

Cementitious Waterproof Coating Manufacturing Guide

How polymer-modified cementitious waterproofing slurries are made, why they suit wet areas and tanks, and how to control powder quality.

01Introduction

In short: a cementitious waterproof coating is a polymer-modified cement slurry applied by brush or trowel to concrete and masonry in wet areas, basements and tanks. It is sold as a powder, or as a powder plus liquid polymer kit. The plant is a dry-blending line with careful sand control, polymer dosing and moisture-proof packing.

Cementitious waterproofing is the standard choice for bathrooms, sunken slabs, basements and tanks because it bonds to concrete, breathes and tolerates immersion when designed for it.

It sits between paint and dry mix mortar, which makes it a natural product for plants that already produce tile adhesive or putty.

02What Is Cementitious Waterproof Coating?

The slurry contains cement, graded fine sand or filler, polymer additives and sometimes crystalline or hydrophobic additives. Rigid single-pack types are mixed with water; flexible two-pack types are mixed with an acrylic or SBR liquid.

Flexible grades can bridge fine cracks, while rigid grades are used where there is no movement.

Products for drinking water tanks need materials suitable for potable water contact under your local rules. Do not claim approval you do not have.

03Applications & End Uses

  • Bathrooms and toilet floors under tiles
  • Basements and sunken slabs
  • Water tanks and sumps (rated grades)
  • Swimming pools and planters (suitable grades)
  • Retaining walls

04Types, Grades & Variants

TypeFeaturesUse
Rigid one-packCement, sand, additives; mix with waterBasements, retaining walls
Flexible two-packPowder plus liquid polymerBathrooms, terraces, tanks
Crystalline-typePore-blocking additivesConcrete structures
Under-tile waterproofingFlexible and tile-adhesive compatibleWet areas

05Raw Materials & Their Functions

Raw materialFunctionSelection note
Portland cement (grey or white)BinderFresh, consistent strength
Fine graded sand or fillerBody and shrinkage controlDry, narrow grading
Redispersible polymer powder or liquid polymerFlexibility and adhesionChoose by flexibility class
Hydrophobic and crystalline additivesWater resistanceDose by trial
Cellulose ether, defoamerWorkabilitySmall dose
Fibres (optional)Crack controlDisperse evenly

06Formulation Guidance

Formulas depend on class. Flexible two-pack products use a higher polymer content in the liquid component.

Component groupIndicative rangeWhy it matters
Cement30% to 50%Binder
Fine sand / filler40% to 60%Body
Polymer powder (one-pack)2% to 12%Flexibility
Additives0.5% to 4%Workability, water repellency
Ranges are indicative starting points for trials, not a ready formula. Final proportions depend on your raw materials, equipment, target cost and the standard you need to meet.

07Manufacturing Process

  1. Dry and screen sandMoisture control.
  2. WeighCement, sand and additives.
  3. Pre-blend additivesSmall premix.
  4. Main mixRibbon or paddle mixer.
  5. TestWorkability, setting, adhesion.
  6. PackMoisture-proof bags; liquid in pails.

08Machinery & Equipment

MachineRole in this product
Ribbon BlenderMain powder mixer
Powder Mixing & Dry Mortar MixerPowder mixing and screw feeding
Dry Mix Plant MachineryComplete line with silos
Paint Filling MachineLiquid polymer filling

09Plant Layout, Space & Utilities

  • Dry, enclosed building
  • Dust collector and PPE
  • Moisture-proof packaging
  • Test bench with cube moulds and a water column

10Quality Control & Testing

Test or checkWhat it tells youMethod or reference
Workability and pot lifeApplicationFlow test and timing
Water impermeabilityWaterproofingWater pressure test on cured samples
Adhesion to concreteBondPull-off
Flexibility classCrack bridgingCrack-bridging test
Setting timeHandlingVicat

11Common Production Problems & Fixes

ProblemLikely causeWhat to do
Cracks after dryingRigid grade on moving slabUse flexible grade
PinholesAir entrapmentBetter mixing and application
Weak adhesionContaminated substrateSurface cleaning
Short pot lifeHot weatherAdd retarder, mix small batches
Powder lumpsMoisture ingressBetter packing

12Capacity, Cost & Investment Factors

Cost mainly reflects polymer content and packaging:

  • Polymer powder or liquid cost
  • Cement price
  • Two-pack kit packaging
  • Dealer and applicator training

13How IPCS Supports This Project

  • Formulation by flexibility class
  • Plant layout for dust control
  • Test plan for waterproofing claims

Scope, deliverables and timelines are written into a quotation after we understand your products, capacity, site and budget. Machine details are indicative and are finalised against your product.

14Frequently Asked Questions

Is cementitious coating better than acrylic?

They serve different needs. Cementitious coatings are better for wet areas and immersion; acrylics are better for flexible roof coatings.

Can it be applied under tiles?

Yes, flexible under-tile grades are made for it. Confirm compatibility with the tile adhesive.

What is a two-pack system?

A powder component mixed on site with a liquid polymer component.

How is it cured?

Keep it damp for the period in the data sheet.

Can I make it in a tile adhesive plant?

Yes, with separate batching and cleaning between products. See tile adhesive plant.

How can IPCS help me start cementitious waterproof coating manufacturing?

IPCS confirms the product range and capacity, plans the process and machines, tunes the formulation with your raw materials, sets up the laboratory, trains your team and supports the first batches. The written quote states exactly what is included.

Get Technical Consultation

Tell us what you want to make. A paint technologist replies with next steps within one working day.

Your details are used only to reply to this enquiry. Direct line: +91 82104 79182.

Planning a paint or dry mix plant?Get Technical Consultation