01Introduction
A basket mill offers some bead-mill benefits at lower cost and complexity. It is common in small and mid-size plants that make many colours.
It does not match a closed horizontal bead mill for throughput or fineness control, so the choice depends on the job.
02What Is Basket Mill?
The basket is lowered into the paint in the tank and rotates with the disperser shaft, drawing paste through the beads. The perforated basket keeps beads inside. Because it works in the vessel, there is no pump or external circuit to clean.
Beads are ceramic or glass of suitable size. Heating can be an issue in solvent systems, so cooling jacketed tanks may be needed.
03Working Principle
Rotation moves beads inside the basket. Paste is drawn through, sheared and ground, and returns to the tank. Repeated circulation reduces particle size.
- Basket immersed in paste
- Bead movement creates grinding
- Circulation cycles refine the paste
- Open tank limits solvent vapour control
04Applications
- Pigment dispersion in small and mid-size batches
- Colour changes in enamel and wood coatings
- Inks and coatings with small volumes
- Premix before a larger mill
- Colorant production in small plants
05Types & Configurations
| Type | Features | Suits |
|---|---|---|
| Standard basket mill | Attached to disperser | General dispersion |
| High-shear basket mill | Higher speed | Faster dispersion |
| Closed basket mill | Covered to limit vapour | Solvent paints |
| Lab basket mill | Small scale | Formulation trials |
06Key Selection Factors
| Factor | What to decide | Guidance |
|---|---|---|
| Batch size | Tank volume | Match basket to batch |
| Basket volume | Bead capacity | Higher volume gives more grinding |
| Bead type and size | Grind level | Same logic as bead mills |
| Cooling | Temperature control | Jacketed tank |
| Material | Wetted parts | SS 304 or 316 |
| Flameproof | Solvent use | Flameproof motor |
07Where It Fits in the Process
- Premix pasteWet pigments.
- Lower basketInto the batch.
- GrindRun for set time.
- Check fineness
- Lift and cleanRemove and flush.
- Let downComplete batch.
08Installation & Utility Requirements
- Disperser with suitable power and lift
- Tank with enough depth
- Cleaning area for basket
- Flameproof area for solvents
09Safety & Operating Practice
- Guard rotating basket
- Lock-out for cleaning
- Control heating
- Solvent vapour control
10Maintenance & Common Problems
| Problem | Likely cause | Fix |
|---|---|---|
| Slow grinding | Low viscosity or too few beads | Adjust viscosity, check bead charge |
| Heating | Long run, solvent | Cooling, run time limits |
| Basket wear | Abrasive pigment | Inspect and replace |
| Bead loss | Damaged screen | Replace screen |
| Foam | Air entrainment | Adjust speed and depth |
11How IPCS Supports Machinery Selection
- Selection between basket mill and bead mill
- Disperser and tank sizing
- Operator training
Machine details are indicative and are finalised against your product, batch size and site during quotation.
12Frequently Asked Questions
Is a basket mill as good as a bead mill?
It is simpler and cheaper but gives less control and lower throughput than a closed bead mill.
Which products suit a basket mill?
Small and medium batches with frequent colour changes.
Can I attach it to any disperser?
Only to one with suitable power, speed and mounting.
What beads are used?
Ceramic or glass beads of size suited to the product.
How is it cleaned?
Lift, flush with solvent or water and wipe.
