01Introduction
Planetary mixers give very uniform mixing for thick products and are also good for small trial batches in a lab or pilot plant.
They cost more per litre than a disperser but handle products others cannot.
02What Is Planetary Mixer?
In a planetary motion, mixing blades travel around the vessel while spinning. Wall scrapers, disperser shafts and vacuum covers are common add-ons. The vessel is removable, which helps cleaning and changeover.
Sizes range from a few litres for laboratories to several hundred litres for production.
03Working Principle
Combined rotation and orbit ensure coverage of the whole vessel, avoiding dead zones. Vacuum removes air and gives dense, bubble-free paste.
- Blade rotation plus orbit
- Scraper for walls
- Optional high-speed disperser
- Optional vacuum and heating
04Applications
- Putty paste and acrylic fillers
- Adhesives, sealants and mastics
- Laboratory and pilot batches
- Dough-like industrial mixes
- Small-volume specialty pastes
05Types & Configurations
| Type | Features | Suits |
|---|---|---|
| Laboratory planetary mixer | Small bowl | Formulation trials |
| Double planetary mixer | Two blades | High viscosity production |
| Vacuum planetary mixer | Sealed with vacuum | Bubble-free pastes |
| Planetary with disperser | Added high shear | Dispersion plus kneading |
| Jacketed planetary | Heating or cooling | Temperature control |
06Key Selection Factors
| Factor | What to decide | Guidance |
|---|---|---|
| Working volume | Batch size | Typically 60 to 80 percent of vessel |
| Viscosity | Torque | Defines motor |
| Vacuum | Needed or not | Pastes where air is a problem |
| Jacket | Temperature | Heat or cool |
| Vessel removal | Changeover | Removable vessels help |
| Explosion protection | Solvent use | Flameproof |
07Where It Fits in the Process
- Load vesselLiquids first.
- Start mixingSlow then faster.
- Add powdersGradually.
- Vacuum and mixIf needed.
- Sample
- Lift and removeDischarge or vessel swap.
08Installation & Utility Requirements
- Floor strength for the lift and vessel
- Power supply
- Vacuum pump if used
- Space for vessel handling
09Safety & Operating Practice
- Guard blades
- Interlock lifting
- Lock-out for cleaning
- Flameproof for solvents
10Maintenance & Common Problems
| Problem | Likely cause | Fix |
|---|---|---|
| Unmixed pockets | Blade clearance | Adjust scraper and clearance |
| Heating | Long mixing | Jacket cooling |
| Air bubbles | No vacuum | Use vacuum |
| Slow discharge | Sticky mix | Vessel tilt or press-out |
| Seal wear | Vacuum seals | Maintain |
11How IPCS Supports Machinery Selection
- Sizing from lab to production
- Vacuum and jacket decisions
- Comparison with sigma and twin shaft mixers
Machine details are indicative and are finalised against your product, batch size and site during quotation.
12Frequently Asked Questions
Planetary or sigma mixer?
Both handle thick mixes. Planetary gives uniform mixing and easy vessel change; sigma is more rugged for very stiff materials.
Do I need vacuum?
For bubble-free products.
Can it disperse pigments?
With a disperser shaft, yes.
Is it good for putty?
Yes for paste putty.
Can it be used in a laboratory?
Yes in small sizes.
